5 Reasons Why Your GE Microwave Not Working But Has Power

ge microwave not working but has power

Microwaves have been one of the most essential requirements of every kitchen. It has made our cooking easier and more convenient. Moreover, many food items can only be prepared in a microwave. But like all electronic devices, there can be technical glitches or malfunctions.

General Electric has been a renowned brand in America when it comes to microwaves and other appliances. They are known for their good quality and durability. But over time in the rare case, they may cause problems.

One of the major problems which you may experience over time is that the microwave has power but is not working.

In this guide, we’ll discuss the common reasons and also troubleshooting tips for your GE microwave not working but has power.

5 Common reasons for Your GE microwave not working but has power

1. Faulty Interlock Switch:

Microwaves have interlock switches that ensure the unit doesn’t operate with the door open. If these switches are faulty or misaligned, the microwave may not start.

Carefully inspect the interlock switches and replace them if necessary. Ensure that the door is closing properly to engage these switches.

2. Malfunctioning Magnetron:

The magnetron is responsible for producing microwaves that heat the food. If it malfunctions, the microwave won’t be able to generate heat.

If you notice unusual noises or burning smells, the magnetron may be the culprit. In such cases, it’s advisable to seek professional assistance for repair or replacement.

3. Verifying Control Panel Settings:

Incorrect settings on the control panel can prevent the microwave from functioning properly, even if it lights up or runs.

Check the cooking time, power level, and cooking mode selected on the control panel. Adjust them as needed.

4. Control Panel Issues:

The control panel or keypad on the microwave may have issues if certain buttons are not responding or if there are error messages.

Clean the keypad and check closely if there are any physical scratches or tears on the start button, also ensure there is no debris which is causing the button malfunction.

If you notice any sign of damage, then this can be the reason your GE microwave isn’t starting. In this case, your microwave requires professional attention.

5. Faulty High Voltage Capacitor:

The high-voltage capacitor in a microwave stores electrical energy that is used to power the magnetron.

If the capacitor is faulty or has failed, it can lead to a lack of heating. Capacitors can store high voltages even after the microwave is unplugged, so it’s essential to discharge them safely before attempting any checks.

If the capacitor is suspected to be defective, it will require replacement.

Troubleshooting tips for GE Microwave Malfunctions

As of now, you may have encountered the real reason for your GE microwave not starting. For any of the technical glitches, you will require professional assistance.

But if there is any minor issue with your appliance not starting, then you can get it done on your own. We have listed below some tips to fix your microwave on your own.

Follow these troubleshooting tips to identify and potentially resolve the issue:

1. Door Issues:

Ensure that the microwave door is closing securely. If the door isn’t latching properly, the microwave’s safety mechanisms may prevent it from operating. Check for any debris or obstructions around the door and clean as needed.

2. Test Outlet Voltage:

Use a voltage tester to confirm that the outlet is providing the correct voltage. Microwaves typically require a dedicated circuit with the appropriate voltage, so make sure the outlet meets these specifications.

3. Check the Control Panel/Keypad:

Inspect the control panel and keypad for any visible signs of damage or wear. Clean the keypad to ensure that buttons are not sticking.

4. Verify Timer Settings:

Confirm that the timer settings are not preventing the microwave from starting. Reset the timer to zero and attempt to operate the microwave again.

5. Examine Turntable and Drive Motor:

Ensure the turntable and its drive motor are properly functioning. If the turntable is not rotating, it may be due to a malfunctioning drive motor. 

Regular Maintenance Tips of GE Microwave

Regular maintenance can help keep your GE microwave in good working condition and extend its lifespan. Here are some maintenance tips for your GE microwave:

1. Clean the Interior:

Regularly clean the interior of the microwave to remove any food splatters or spills. Use a mild detergent or a mixture of water and vinegar to wipe down the interior surfaces, including the turntable.

2. Clean the Exterior:

Wipe down the exterior surfaces of the microwave with a damp cloth. Avoid using abrasive cleaners, and pay special attention to control panels and buttons. If there are stubborn stains, a mild kitchen cleaner may be used.

3. Avoid Overloading:

Avoid overloading the microwave with heavy or oversized containers. Follow the manufacturer’s guidelines for maximum weight and size recommendations.

4. Inspect and Clean the Control Panel:

Gently clean the control panel and keypad with a soft, damp cloth. Avoid excessive water, and never use abrasive cleaners that could damage the control panel.

5. Schedule Professional Maintenance:

If you notice any unusual noises, smells, or performance issues, consider scheduling professional maintenance. A certified technician can perform a thorough inspection and address any potential problems.

Regular maintenance helps ensure the optimal performance of your GE microwave and contributes to a safe and efficient cooking environment. Refer to your GE microwave’s user manual for specific maintenance recommendations according to the variant, from the manufacturer.

Wrapping Up

Wrapping up this guide of maintenance, fixing tips, and reasons for your GE microwave not working but has power, we hope you understood the issue with your appliance and become aware of the further steps.

Microwave ovens, being an electrical device, may have minor or major issues over time, and it is not uncommon; even if it is from a trusted brand of General Electric.

By regular maintenance and following the manufacturer’s instructions, you can ensure smooth performance and long life of your device.

Leave a Reply

Your email address will not be published. Required fields are marked *