Whirlpool Washing Machine Start Button Not Working? (Know Why)

whirlpool washing machine start button not working

Your trusty Whirlpool washing machine has been a reliable companion for countless laundry days, but suddenly, the start button refuses to cooperate.

Don’t worry; you’re not alone. Many homeowners face this unpleasant situation, wondering why their laundry is on pause. In this guide, we’ll delve into the typical culprits behind the Whirlpool washing machine’s start button malfunction.

You’ll discover troubleshooting tips that will get you back to efficiently washing clothes quickly. Let’s unravel the mystery behind this hiccup and breathe new life into your laundry routine.

5 Common Reasons for Your Whirlpool Washing Machine Start Button Not Working

1. Electrical Issues

Electrical problems are a common reason for electronic devices to stop functioning. Ensure that your washing machine is plugged in properly and there is a smooth flow of electricity to your machine. Also, ensure that the washing machine wire is working fine and has no cuts or damage.

2. Control Panel Problems

Sometimes, the control panel may have issues. It could be due to worn-out buttons, damaged wiring, or a malfunctioning control board. Examine the control panel for any visible damage or loose connections. If you see any issues, you may need a technician to replace the control panel or repair the wiring.

3. Door Locking Mechanism

The door interlock or locking mechanism is a safety feature in Whirlpool washing machines. It ensures that the washing machine door’s lid is closed to avoid any mishaps while functioning.

Make sure the door or lid is closed properly. If the lid switch is faulty or not working properly the washing machine will not start and you have to get it repaired or replaced.

4. Faulty Start Button

One more common reason can be the start button being faulty. Over time, these buttons can wear out or get stuck, making them unresponsive.

Try pressing the button firmly to see if it responds. If not, you may need to replace the start button or have a technician inspect the control board.

5. Faulty Motor or Drive Belt

If the motor or drive belt in your washing machine is damaged or worn out, it can prevent the start button from working. The motor is responsible for spinning the drum, and if it fails to function properly, it can disrupt the washing cycle.

Check for unusual noises or a burning smell when you attempt to start the machine. If you notice these symptoms, it’s possible that the motor or drive belt needs replacement.

Troubleshooting Tips

Check Power Supply: Ensure that the washing machine is plugged in and that the power outlet is working. Test the outlet with another device to confirm it’s supplying power.

Door or Lid Interlock: Make sure the door or lid is securely closed. The washing machine won’t start if the door or lid isn’t properly latched.

Control Panel Inspection: Examine the control panel for visible damage, loose wires, or signs of wear. Ensure all buttons are functioning as they should.

Cycle Selection: Verify that you’ve selected the desired washing cycle and settings. Some settings may prevent the machine from starting if they’re incompatible.

Pause/Cancel Function: If the machine was paused or canceled during a previous cycle, pressing the start button might not work until you’ve cleared the machine’s memory by canceling the cycle or turning it off and on again.

Child Lock Feature: Some Whirlpool washing machines have a child lock feature that disables certain buttons, including the start button, to prevent children from tampering. Refer to your user manual to see how to enable or disable this feature.

Safety Sensors: Modern washing machines often have safety sensors that detect issues like an unbalanced load or water level problems. If these sensors detect an issue, the machine may not start. Check for any error codes on the display and consult the user manual for guidance on how to resolve these issues.

Control Board Reset: Try resetting the control board by unplugging the machine for a few minutes and then plugging it back in. This can sometimes clear minor glitches.

Testing with Another Load: Load the washing machine with a small test load and attempt to start the cycle again. Sometimes, overloading the machine can cause it not to start.

Professional Service: If none of the above steps resolve the issue, or if you suspect a more complex internal problem with the washing machine, it’s advisable to contact Whirlpool customer support or a qualified appliance repair technician for a thorough diagnosis and repair.

Remember to prioritize safety when troubleshooting, and if you’re unsure about any steps, consult your user manual or seek professional assistance.

Final Verdict

A non-responsive start button on your Whirlpool washing machine can be a frustrating hurdle in your daily routine. However, as we’ve discussed in this guide, the common reasons behind this issue, and more often than not, a solution is within reach.

By following the troubleshooting tips provided, you can diagnose and address the problem efficiently. Remember to prioritize safety and, when needed, seek professional assistance.

Your laundry days don’t have to wait for long. With a little know-how and these practical steps, you can regain the full functionality of your trusty Whirlpool washing machine.

Leave a Reply

Your email address will not be published. Required fields are marked *